第一步:確認火花塞的位置：發電機火花塞都在小蓋板下方(紅色箭頭所指)推開蓋板 如圖：

　　Step 1: Confirm the position of the spark plugs: The generator spark plugs are all located under the small cover plate (indicated by the red arrow). Push open the cover plate as shown in the picture:

　　第二步: 火花塞高壓屏蔽冒如圖：金屬高壓屏蔽冒，防輻射、抗干擾。

　　Step 2: Spark plug high-voltage shielding, as shown in the picture: Metal high-voltage shielding, anti radiation, anti-interference.

　　第三步：拔出高壓屏蔽冒如圖：紅色箭頭所指位置：向上拔出高壓屏蔽冒（因為機器工作時有震動，為防止高壓冒脫落或松動，所以屏蔽冒內有橡膠圈，拔下來時會有點緊，可借助工具如老虎鉗等）

　　Step 3: Pull out the high-voltage shielding device as shown in the picture: Position indicated by the red arrow: Pull out the high-voltage shielding device upwards (due to the vibration of the machine during operation, in order to prevent the high-voltage device from falling off or loosening, there is a rubber ring inside the shielding device, which may be a bit tight when pulled out, and tools such as pliers can be used)

　　第四步：找到火花塞拆卸工具如圖取出與火花塞相應的套筒如圖：

　　Step 4: Find the spark plug disassembly tool as shown in the figure and remove the sleeve corresponding to the spark plug as shown in the figure:

　　第五步：拆卸火花塞如圖逆時針旋轉拆下火花塞

　　Step 5: Disassemble the spark plug by rotating counterclockwise as shown in the figure. Remove the spark plug

　　第六步：拆卸出火花塞如圖火花塞使用久了，上面會覆蓋一層積碳，會導致機器啟動困難，加速不穩定，油耗增多等多種問題。解決辦法： 用火燒，把積碳燒掉。用汽油侵泡后用鋼絲刷刷去積碳。直接更換同樣型號火花塞。

　　Step 6: Disassemble the spark plug as shown in the picture. If the spark plug is used for a long time, it will be covered with a layer of carbon deposits, which will cause various problems such as difficulty in starting the machine, unstable acceleration, and increased fuel consumption. Solution: Use fire to burn off the carbon deposits. Soak gasoline and use a wire brush to remove carbon deposits. Replace the spark plug of the same model directly.

　　第七步:全部復位 重新裝好火花塞（一定要擰緊），按原來全部復位，重啟機器，即可正常使用。

　　Step 7: Reset everything and reinstall the spark plugs (be sure to tighten them), reset everything as before, restart the machine, and it can be used normally.

　　本文由 馳放氣發電機組  友情奉獻.更多有關的知識請點擊  http://m.qmtg666.com/   真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from the exhaust gas generator set For more related knowledge, please click http://m.qmtg666.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.